DIRECTIONS

Mix one ounce of Paint Pump Wash per gallon of water. To be used as a cleaning solution for paint spraying pumps or similar equipment. Recommended for water-based acrylic and latex paint, Oil based paints must first be flushed with their recommended paint thinner. Paint Pump Wash is not recommended as a storage solution. For long term storage refer to your pump manufacture guidelines.

Flush the system

Remove excess paint by placing the suction hose in a bucket of water then run the sprayer to flush out the pump, lines and passages to remove as much paint as possible.

Clean the system

Place the suction hose in a bucket of Paint Pump Wash cleaning solution then run through the sprayer pump, lines and passages, spray gun and tip. Flush out, dilute and dispose.